Pengaruh Intercritical Quenching dan Normalizing terhadap Laju korosi dan Struktur Mikro Mild Steel
Keywords:ASTM A36, Corrosion, Micro structure, Quenching, Normalizing
Corroded materials get promote to the decrease in physical and mechanical properties which will affect to the decrease in the quality of the material and will have a huge impact on the industrial world. The purpose of this research is to observe the effect of the intercritical heating temperature of 750 °C with the quenching and normalizing cooling method due to the corrosion rate and its effect on the phenomenon of hardness change values in mild steel. The tests that was conducted are corrosion testing and hardness testing on ASTM A36. The results showed that there was a significant decrease in the corrosion rate and hardness values in the normalizing test sample, while in the quenching test sample there was an increase in the hardness value which that led to the presence of a ferrite – martensite dual phase on the surface of the quenching specimen which reduced ductility and increased the hardness value of mild steel.
Keywords: ASTM A36, Corrosion, Micro structure, Quenching, Normalizing
S. Paul and R. Mondal, “Prediction and Computation of Corrosion Rates of A36 Mild Steel in Oilfield Seawater,” J Mater Eng Perform, 2018, doi: 10.1007/s11665-018-3385-8.
O. S. I. Fayomi, I. G. Akande, and S. Odigie, “Economic Impact of Corrosion in Oil Sectors and Prevention: An Overview,” J Phys Conf Ser, vol. 1378, no. 2, 2019, doi: 10.1088/1742-6596/1378/2/022037.
“Corrosion Prevention,” in Corrosion and Protection, London: Springer London, pp. 237–307. doi: 10.1007/978-1-85233-845-9_10.
O. Sunday Isaac Fayomi and A. Patricia Idowu Popoola, “Corrosion propagation challenges of mild steel in industrial operations and response to problem definition,” in Journal of Physics: Conference Series, Dec. 2019, vol. 1378, no. 2. doi: 10.1088/1742-6596/1378/2/022006.
S. Prifiharni, Moch. S. Anwar, and E. Mabruri, “The Influence Of Heat Treatment On Microstructure And Corrosion Resistance Of 13cr-1mo Martensitic Stainless Steel,” Widyariset, vol. 2, no. 1, p. 9, 2016, doi: 10.14203/widyariset.2.1.2016.9-16.
S. Sundjono, G. Priyotomo, L. Nuraini, and S. Prifiharni, “Corrosion behavior of mild steel in seawater from northern coast of java and southern coast of Bali, Indonesia,” Journal of Engineering and Technological Sciences, vol. 49, no. 6, pp. 770–784, 2017, doi: 10.5614/j.eng.technol.sci.2017.49.6.5.
M. Pramudita and M. Nasikin, “The Effect of Immersion Time on The Ability of Tannins to Inhibit The Corrosion Rate of Mild Steel in 1M H2SO4 Solution,” 2020. [Online]. Available: http://jurnal.untirta.ac.id/index.php/WCEJ
N. Ali and M. A. Fulazzaky, “The empirical prediction of weight change and corrosion rate of low-carbon steel,” Heliyon, vol. 6, no. 9, p. e05050, Sep. 2020, doi: 10.1016/j.heliyon.2020.e05050.
B. U. Oreko, “Corrosion Rates and its Impact on Mild Steel in Some Selected Environments Assessment of Inhibitive Drugs for Corrosion Inhibition Applications in Petrochemical Plants-A Review View project Product development View project,” 2016.
A. Gaikwad et al., “Development Of Dual Phase Steel And Determination Of It’s Mechanical Properties And Comparison With Low Carbon Steel,” Ijmet, 2014. [Online]. Available: www.jifactor.com
I. Alenezi, “Effects of Heat Treatment on the Corrosion Behavior of ASTM A-36 Steel,” 2020. [Online]. Available: www.etasr.com
A. Kumar Tanwer, “Effect of Various Heat Treatment Processes on Mechanical Properties of Mild Steel and Stainless Steel,” American International Journal of Research in Science, pp. 14–722, 2014, [Online]. Available: http://www.iasir.net
. H. Zhang et al., “The effect of immersion corrosion time on electrochemical corrosion behavior and the corrosion mechanism of eh47 ship steel in seawater,” Metals (Basel), vol. 11, no. 8, Aug. 2021, doi: 10.3390/met11081317.
V. Moura, A. Y. Kina, S. S. M. Tavares, L. D. Lima, and F. B. Mainier, “Influence of stabilization heat treatments on microstructure, hardness and intergranular corrosion resistance of the AISI 321 stainless steel,” in Journal of Materials Science, Jan. 2008, vol. 43, no. 2, pp. 536–540. doi: 10.1007/s10853-007-1785-5.
A. Adesoji ADEDIRAN, S. Aribo, M. Olalekan Hakeem AMUDA, A. A. Adediran, and M. O. Amuda, “Mechanical properties of dual phase steel quenched in bitumen medium,” Leonardo Electronic Journal of Practices and Technologies, no. 26, pp. 1–16, Jan. 2015, [Online]. Available:http://lejpt.academicdirect.org
How to Cite
Copyright (c) 2023 Jurnal Rekayasa Mesin
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.