Peningkatan Kemampuan Mesin Bubut untuk Pemesinan Proses Freis dengan Menambahkan Alat Bantu Cekam


  • Dimas wicaksono Jurusan Teknik Mesin Universitas Sriwijaya
  • Muhammad Yanis Jurusan Teknik Mesin Fakultas Teknik Universitas Sriwijaya
  • M. A. Ade Saputra Jurusan Teknik Mesin Fakultas Teknik Universitas Sriwijaya



Clamp tool, lathe process, freis process, increased productivity


Fixtures are made and designed specifically to help the manufacturing process. The function of this fixture is to save costs, ensure thorough product quality, reduce waiting time and increase production results. In this research, efforts were made to increase the productivity capabilities of lathe machines by adding a fixture. This fixture is used to carry out face milling and drilling processes on flat surface workpieces. This additional equipment is installed on the lathe to replace the tool post and its function is to grip the workpiece to be machined. The cutting tool is held on the lathe spindle directly or using a special spindle shaft. With this condition, where the workpiece experiences a feed motion and meanwhile a cutting motion by the cutting tool, the process is the same as on a milling machine. The fixture made is as expected, which based on accuracy testing and running tests shows that machining errors and deviations are within the standardized range of 0.4 to 25 µm.


Download data is not yet available.


C. Lane, Jig and fixture handbook, Third Edit. St. Louis, USA: Carr Lane Manufacturing Co., 2016.

T. Mahesh, L. S. Kumar, and K. Chandra, “Design and Ansylsis of A Multipurpose Jig in Machine Tool,” Int. J. Res. Advent Technol., no. March, 2019.

R. Siva, B. Siddardha, S. Yuvaraja, and P. Karthikeyan, “Improving the productivity and tool life by fixture modification and renishaw probe technique,” Mater. Today Proc., vol. 24, pp. 782–787, 2020.

B. C. Tjiptady, R. Z. Rahman, R. F. Meditama, and G. Widayana, “Jig and Fixture Redesign for Making Reamer on Head Cylinder,” J. Pendidik. Tek. Mesin Undiksha, vol. 9, no. 1, pp. 32–41, 2021.

C. Chikwendu Okpala, “The Design and Need for Jigs and Fixtures in Manufacturing,” Sci. Res., vol. 3, no. 4, p. 213, 2015.

H. Chandrakant Pandit, “Jigs and Fixtures in Manufacturing Article in,” Harshwardhan Chandrakant Pandit. Int. J. Eng. Res. Appl., vol. 12, no. October, pp. 50–55, 2022.

H. C. Pandit and K. R. Pandit, “Advances in Jig Manufacturing: A Comprehensive Review of Techniques, Technologies, and Applications,” Harshwardhan Chandrakant Pandit. Int. J. Eng. Res. Appl., vol. 13, no. July, pp. 1–10, 2023.

E. G. Hoffman, Jix and Fixture Design, 1st ed., vol. 1. Clifton Park-New York: Delmar - Learning Drafting Series, 2011.

D. A. Stephenson and J. S. Agapiou, Metal Cutting Theory and Practice, Third Edit. New York: CRC Pres-Taylor & Francis Group, 2016.

K. Venkataraman, Design of Jigs, Fixtures and Press Tools, 1st ed. London, U.K.: John Wily & Sons Ltd, 2015.

M. Yanis, A. antoni Akhmad, Barlin, and A. Firdaus, “Penerapan Alat untuk Pemberian Cairan Pemotongan dengan Sistem Minimum Quantity Lubricant (MQL) untuk Pemesinan Ramah Lingkungan Di Bengkel Las dan Bubut Tris Palembang,” Lembaga Pengabdian kepada Masyarakat Universitas Sriwijaya, Palembang, 2021.

W. Grzesik, Advanced Machining Processes of Metallic Materials - Theory, Modelling, and Applications, Second Edi. Amsterdam: Joe Hayton, 2017.

M. P. Groover, Fundamentals of Modern Manufacturing: Materials, Processes, and Systems, no. Chapter 3. 2013.



How to Cite

wicaksono, D., Yanis, M., & Saputra, M. A. A. (2023). Peningkatan Kemampuan Mesin Bubut untuk Pemesinan Proses Freis dengan Menambahkan Alat Bantu Cekam. Jurnal Rekayasa Mesin, 23(2), 49–53.