Dinamic Simulation Solidworks pada Perancangan Mesin Brush Sander

Authors

  • Faridz Ashar Uriansyah Jurusan Teknik Mesin, Universitas Nusantara PGRI Kediri
  • Fatkur Rhohman Jurusan Teknik Mesin, Universitas Nusantara PGRI Kediri

DOI:

https://doi.org/10.36706/jrm.v24i1.449

Keywords:

Simulasi Dinamik, Solidwork, brush sunder

Abstract

This research aims to analyze the strength and response of the frame of the brush sunder machine to forces and loads. The research method involves using the SolidWorks application with an angle iron frame and ASTM 36 material. The research results include critical data such as stress, displacement, and safety factor. Applying forces and loads to the frame through the SolidWorks model allows for a thorough evaluation of the structural strength and its response. Stress data provides an overview of the maximum load, displacement identifies deformation, and the safety factor indicates the structural reliability level. This study is expected to contribute to a deeper understanding of the performance and safety of the brush sunder machine frame under various operational conditions.

Downloads

Download data is not yet available.

References

P. T. Aneka and T. Tbk, “Pengangkutan Bijih Nikel di Performance Analysis of Belt Conveyor to Optimize the Transport of Nickel Ore in PT . Aneka Tambang Tbk Ubpn Pomalaa,” vol. 1, no. 4, pp. 48–54, 2017.

H. P. Setyawan, D. Suryadi, D. T. Mesin, F. Teknik, and U. Bengkulu, “Analisis Karakteristik Vibrasi pada Paper Dryer Machine untuk Deteksi Dini Kerusakan Spherical Roller Bearing,” vol. 20, no. 2, pp. 110–117.

J. Rekayasa, D. A. N. Manajemen, S. Industri, V. O. L. No, T. Industri, and U. Brawijaya, “Model Simulasi Sistem Produksi dengan Sistem Dinamik Guna Simulation Model of Production System with System Dynamic to,” vol. 3, no. 2, pp. 256–267.

G. Chen and M. Qu, “Modeling and analysis of fi t clearance between rolling bearing outer ring and housing,” Journal of Sound and Vibration, vol. 438, pp. 419–440, 2019, doi: 10.1016/j.jsv.2017.11.004.

S. Tinjauan, K. Kayu, J. Tectona, S. Anggiriani, and J. Sutiawan, “Cepat Tumbuh untuk Bahan Baku Furnitur ( A Review of the Suitability of Fast Growing Teak Wood for Furniture Material ),” vol. 9, no. 1, pp. 69–78, 2023.

A. Eka, N. Rizali, E. F. Jasjfi, and E. T. Leksono, “Pengolahan Kayu Peti Kemas Sebagai Media Upcycle Produk Lampu Meja,” vol. 09, no. September, pp. 1453–1460, 2023.

A. Karmana, I. P. Ilyas, and A. Ramdan, “Perancangan Mesin Auto Level Buff Kayu Upright Piano Untuk Komponen Panel,” vol. 4, no. 1, pp. 11–24, 2022.

F. Novyanto, E. Nurraharjo, S. T. Informatika, and U. S. Semarang, “Penentuan Jenis Kayu untuk Bahan Meubel dengan Metode,” vol. 5, no. 2, pp. 191–200, 2022.

Downloads

Published

2024-03-28

How to Cite

Uriansyah, F. A., & Rhohman, F. (2024). Dinamic Simulation Solidworks pada Perancangan Mesin Brush Sander. Jurnal Rekayasa Mesin, 24(1), 15–19. https://doi.org/10.36706/jrm.v24i1.449

Issue

Vol. 24 No. 1 (2024): Jurnal Rekayasa Mesin

Section

Articles

License

Copyright (c) 2024 Jurnal Rekayasa Mesin

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Jurnal Rekayasa Mesin (JRM) memberikan akses terbuka terhadap siapapun agar informasi dan temuan pada artikel tersebut bermanfaat bagi semua orang. Semua konten artikel Jurnal ini dapat diakses dan diunduh secara gratis, tanpa dipungut biaya, sesuai dengan lisensi creative commons yang digunakan.