Analisa Simulasi Kekuatan Rangka pada Mesin Brush Sander menggunakan Aplikasi Solidwork

Fendi Fardana; Fatkur Rhohman

doi:10.36706/jrm.v24i1.450

Authors

Fendi Fardana Teknik Mesin, Universitas Nusantara PGRI Kediri
Fatkur Rhohman Teknik Mesin, Universitas Nusantara PGRI Kediri

DOI:

https://doi.org/10.36706/jrm.v24i1.450

Keywords:

Solidworks, Strain, Stress, Deformation

Abstract

This research aims to analyze the strength and response of the brush sunder machine frame to forces and loads. The research method utilizes the SolidWorks application with a frame made of angle iron and ASTM 36 material. The research results encompass critical data such as stress, displacement, and safety factors. The application of forces and loads on the frame through the SolidWorks model enables a thorough evaluation of the structural strength and its response. Stress data provides an overview of maximum loads, displacement identifies deformations, and safety factors indicate the level of structural reliability. The results show values of deformation at 1.09 mm, stress at 4.8 N/m, Strain at 4.2, and FOS at 1.87. These values are within safe limits. This research is expected to contribute to a better understanding of the performance and safety of the brush sunder machine frame under various operational conditions.

Downloads

Download data is not yet available.

References

S. Suryady and E. Aprianto Nugroho, ‘Simulasi Faktor Keamanan dan Pembebanan Statik Rangka Pada Turbin Angin Savonius’, Jurnal Ilmiah Multidisplin, vol. 1, no. 2, pp. 42–48, Mar. 2022, Accessed: May 08, 2024. [Online]. Available: https://journal.admi.or.id/index.php/JUKIM/article/view/94

J. Yanda Zaira and M. T. Isnaini Pradana, ‘Rancang Bangun dan Analisa Kekuatan Rangka Mesin Pencuci Singkong Metode Rotary dengan Solidworks Simulation’, Jurnal Politeknik Caltex Riau, vol. 8, no. 2, pp. 205–213, Nov. 2022, Accessed: May 07, 2024. [Online]. Available: https://doi.org/10.35143/elementer.v8i2.5579

P. Yosua, D. Budhi Santoso, and A. Stefanie, ‘Rancang Bangun Automatic Washing and Drying System untuk Mesin Pencuci Cylinder Block Motor’, Jurnal Ilmiah Wahana Pendidikan, vol. 7, no. 4, pp. 430–444, 2021, doi: 10.5281/zenodo.5167080.

P. D. A. N. Pengabdian, P. Rahmawaty, M. Si, D. Respati, S. Sumunar, and M. Si, ‘Prosiding Seminar Nasional’, in PROSIDING SEMINAR NASIONAL, Jan. 2012, pp. 978–979.

A. Aziz Salimi, ‘Simulasi Finite Element Analysis (Fea) dan Fabrikasi Implan untuk Perbandingan Kinerja Implan Kovensional dan Custom Cruciate Retaining (Cr) untuk Penderita Osteoarthritis Berdasarkan Rekonstruksi Data Mri/Ct Scan Tulang Lutut’, Yogyakarta, 2023. Accessed: May 08, 2024. [Online]. Available: https://www.scribd.com/document/727939261/18525129

L. T. Kusuma and H. Mahmudi, ‘Analisa Kekuatan Rangka Mesin Pengupas Kacang Tanah Menggunakan Software Solidworks’, in INOTEK, Online, 2023, pp. 384–392. Accessed: May 08, 2024. [Online]. Available: https://proceeding.unpkediri.ac.id/index.php/inotek/

R. Novitaningrum, F. Wisnu Saputro, and W. Adhi Saputro, ‘Efisiensi Teknis Usahatani Ubi Kayu di Lahan Kering Kabupaten Karanganyar, Provinsi Jawa Tengah’, MEDIAGRO, vol. 18, no. 2, pp. 208–217, 2022, Accessed: May 08, 2024. [Online]. Available: https://publikasiilmiah.unwahas.ac.id/Mediagro/article/view/6962

A. Reynaldo Louis and G. Mulyono, ‘Perancangan Fasilitas Duduk Sebagai Sarana Penggunaan Smart Phone dan Game Mobile’, JURNAL INTRA, vol. 7, no. 2, pp. 545–550, 2019, Accessed: May 08, 2024. [Online]. Available: https://publication.petra.ac.id/index.php/desain-interior/article/view/8990

A. Taqiyyan, A. Slamet, and Giyanto, ‘Analisa Buckling Terhadap Rangka Rotary Table Menggunakan Metode Finite Element Methode’, in National Conference of Industry Engineering and Technology, 2022, pp. 85–94. Accessed: May 08, 2024. [Online]. Available: https://www.conf.nciet.id/index.php/nciet/article/view/260

R. Ardan Pradana, ‘Perancangan dan Pembuatan Mesin Belt Sander untuk Ukm Rosse Bambu di Margoagung Sayegan Sleman’, Yogyakarta, 2022. Accessed: May 08, 2024. [Online]. Available: https://dspace.uii.ac.id/handle/123456789/41779

S. Noventya Cahyani, M. T. Safirin, D. S. Donoriyanto, and N. Rahmawati, ‘Human Error Analysis to Minimize Work Accidents using the HEART and SHERPA Methods at PT. Wonojati Wijoyo’, PROZIMA (Productivity, Optimization and Manufacturing System Engineering), vol. 6, no. 1, pp. 48–59, Jun. 2022, doi: 10.21070/prozima.v6i1.1569.